A-A-52427 - Nut, Plain, Single Ball Seat, Hexagon Wheel Mounting - 3/4 And 1-1/8 Inch
This commercial item description (CID) covers a hexagon wheel mounting plain, single ball seat nut which is used to mount and secure wheels to the vehicle's axle and is refered to herein as the nut.
A-A-55607 - Washer, Lock, Flat, External Tooth, Nonmagnetic (S/S By Ms16213)
This commercial item description (CID) depicts the requirements for a nonmagnetic external 100th flat lock washer.
A-A-55608 - Washer, Finishing-Countersunk (S/S By Ms27129)
This commercial item description (CID) depicts the requirements for a finishing countersunk washer.
A-A-55609 - Washer, Lock, Flat-Internal Tooth (S/S By Ms35333)
This commercial item description (CID) depicts the requirements for a flat-internal tooth lock washer.
A-A-55610 - Washer, Lock-Spring, Helical, Regular (Medium) Series (S/S By Ms35338)
A-A-55611 - Washer, Lock, Internal And External Tooth (S/S By Ms45904)
This commercial item description (CID) depicts the requirements for an internal or external tooth lock washer.
A-A-55612 - Washer, Lock-Helical Spring, Hi-Collar (S/S By Ms51848)
This commercial item description depicts the requirments for hi-collar helical spring lock washers.
AN121501THRUAN121525 - Nut And Plain (S/S By Sae-As121501Thruan121525)
AN121526THRUAN121550 - Nut - Plain, Corrosion Resistant Steel
AN121551THRUAN121575 - Nut, Plain, Castellated Hexagon
AN121576THRUAN121600 - Nut-Castle, Corrosion Resistant Steel (Use Ms-9358)
AN122576THRUAN122600 - Washer-Plain, Steel (Use Ms9320)
AN150401THRUAN150425 - Nut-Hex, Check (S/S By Sae-As150401Thruas150425)
AN150426THRUAN150450 - Nut-Hex, Check (S/S By Sae-As150426Thruas150450)
AN256 - (
Images) Nut - Self Locking, Plate, Right Angle, 250 Deg. F (S/S By Nasm256)
AN310 - ( Images) Nut, Plain, Castellated, Airframe (S/S By Nasm310)
AN315 - ( Images) Nut, Plain, Airframe (S/S By Nasm315)
AN316 - ( Images) Nut, Jam, Hexagon (S/S By Nasm316)
AN320 - ( Images) Nut, Plain, Castellated, Shear (S/S By Nasm320)
AN325 - Nut & Plain Hex (Fine Thd)
AN335 - Nut - Plain Hex. (Coarse Thread)
AN340 - ( Images) Nut, Plain, Hexagon, Non-Structural, Coarse Thread
AN341 - Nut, Plain, Hexagon, Electrical (Use Ms35649 Or Ms35650)
AN345 - ( Images) Nut, Plain, Hexagon, Non-Structural, Fine Thread
AN350 - ( Images) Nut, Plain, Wing (S/S By Ms35425 And Ms35426)
AN355 - Nut- Engine, Slotted ( Use An 310)
AN356 - Lock - Nut
AN361 - Nut - Self Locking, Plate, Countersunk 100 Deg., 550 Deg. F (Use Ms-21049 Or Ms-21050)
AN362 - ( Images) Nut, Self-Locking, Plate, Non-Countersunk, 550 Deg. F (S/S By Ms21047 And Ms21048)
AN363 - ( Images) Nut, Self-Locking, 550 Degrees F
AN364 - ( Images) Nut-Self Locking, Thin, 250 Deg. F (S/S By Ms21042, Ms21083, Or Ms21245)
AN366 - Nut-Plate, Countersunk 82 Deg. (S/S By Ms21047, Ms21048, Or Ms21078)
AN367 - ( Images) Nut-Plate, Countersunk, 82 Deg.
AN373 - ( Images) Nut - Self Locking, Plate, Countersunk 100 Deg., 250 Deg. F (S/S By Ms21049)
AN5001 - Nut - Propeller Hub Clamping Ring
AN8013 - Washer & Vibration Insulator Stop
AN935 - Washer - Lock, Spring (S/S By Ms35338)
AN936 - ( Images) Washer, Tooth Lock
AN940 - Washer - Burr (Use An-960)
AN945 - Washer&Plain, Commercial Standard (See Ms15795)
AN960 - Washer, Flat (S/S By Nas1149)
AN961 - ( Images) Washer - Flat, Electrical (S/S By Nasm961)
AN970 - ( Images) Washer, Flat (S/S By Nasm970)
AN975 - ( Images) Washer & Taper Pin
AND10068 - Nuts And Plate Nuts - Self Locking, Functional Limitations Of (S/S By Ms33588)
DOD-N-63476 - ( Images) Nut, Plain, Welding, General Specification For, Metric
This specification covers metrically dimensioned steel plain welding nuts (see 6.1).
DOD-N-63476/1 - ( Images) Nut, Plain, Welding, Metric
DOD-N-63548 - ( Images) Nut, Plain, Hexagon, Wheel Mounting, Metric General Specification For
This specification covers metrically dimensioned steel hexagon plain wheel mounting nuts.
DOD-N-63548/1 - Nut, Plain, Hexagon, Cone Seat, Wheel Mounting, Metric
DOD-N-70333 - ( Images) Nut, Plain And Self-Locking, Clinch, Metric (Self-Clinching, Knurled Collar) Fixed And Floating, General Specification For
This specification covers metric nuts which are permanently attached to a structure by pressing the nut shank into a single hole.
DOD-N-70333/1 - ( Images) Nut, Plain And Self-Locking, Clinch, Fixed, Metric (Self Clinching, Knurled Collar)
DOD-N-70333/2 - ( Images) Nut, Plain And Self-Locking, Clinch, Floating, Metric (Self Clinching, Knurled Collar)
DOD-W-63474 - Washers, Spring Tension, Metric, General Specification For
This specification covers metrically dimensioned steel, spring tension washers: cylindrically curved, waved and Belleville spring.
DOD-W-63474/1 - ( Images) Washers, Spring Tension, Cylindrically Curved And Waved, Metric
DOD-W-63474/2 - Washer, Spring Tension, (Belleville Spring), Metric
DOD-W-63474/3 - ( Images) Washer, Spring Tension, Serrated (Ribbed) (Belleville Spring), Metric
DOD-W-63546 - Washer, Key, Metric General Specification For
This specification covers flat long, flat long and short, and external types of washer, key, metric.
DOD-W-63546/1 - ( Images) Washer, Key, Flat, Long, Steel, Metric
DOD-W-63546/2 - ( Images) Washer, Key, Flat, Long, Brass, Metric
DOD-W-63546/3 - ( Images) Washer, Key, Flat, Long And Short, Steel, Metric
DOD-W-63546/4 - ( Images) Washer, Key, Flat, Long And Short, Brass, Metric
DOD-W-63546/5 - ( Images) Washer, Key, External, Steel, Metric
DOD-W-63546/6 - ( Images) Washer, Key, External, Brass, Metric
DOD-W-63546/7 - ( Images) Washer, Key, Internal, Steel, Metric
DOD-W-63546/8 - ( Images) Washer, Concave And Washer Convex (Spherical Set), Steel, Metric
DOD-W-70336 - Washers, (Metric), General Specification For
This specification covers metrically dimensioned carbon steel, corrosion resistant and phosphor bronze lock washers, helical spring, internal tooth and external tooth.
DOD-W-70336/1 - ( Images) Washer, Lock Spring, Helical, Regular Series, (Metric)
DOD-W-70336/2 - ( Images) Washer, Lock Spring, Helical, Light Series (Metric)
DOD-W-70336/3 - ( Images) Washer, Lock Flat, Internal Tooth (Metric)
DOD-W-70336/4 - ( Images) Washer, Lock, Flat, External Tooth (Metric)
DS51402 - Nut, Plain, Wing, Metric
FF-N-836 - ( Images) Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding And Single Ball Seat
FF-N-845 - Nut, Plain, Wing, Inch And Metric
FF-W-100 - Washer, Lock (Tooth)
This specification covers tooth lockwashers use in assemblies with bolts, studs and machine screws (see 6.1).
FF-W-84 - Washers, Lock (Spring)
This specification covers a helical spring type washer for use with nut, bolts, screws, and studs to prevent them from loosening.
FF-W-92 - Washer, Flat (Plain)
This specification covers plain, flat washers.
MIL-B-2677 - Bolts And Clips (Alloy-Steel) And Nuts (Carbon-Steel), Holding-Down (For Ordnance Mounts)
MIL-B-70332/4 - Washer, Shouldered (Bolt Assembly, Clamp)
MIL-B-70332/5 - Washer, Spring Tension (Bolt Assembly, Clamp)
MIL-DTL-21338 - Washer, Key Retaining, Ball And Roller Bearings
This specification covers the procurement requirements for retaining key washers for use in assemblies with ball and roller bearings (see 6.1).
MIL-DTL-25027 - Nut, Self-Locking 250 Degree F, 450 Degree F, And 800 Degree F (S/S By Nasm-25027)
MIL-DTL-45913 - Nuts, Self-Locking, Hexagon, Prevailing Torque
This specification establishes mechanical and performance requirements for prevailing-torque hexagon locknuts.
MIL-DTL-45938/11 - Nut, Plain, Clinch And Nut,Self-Locking, Clinch (Floating, 400 Degree F) (S/S By Nasm45938/11)
MIL-DTL-70329 - Nut, Plain, Round, Ball And Roller Bearings, Metric, General Specification For
This specification covers nut, plain, round, ball and roller bearings, that is slotted on its periphery, for use in assemblies with ball and roller bearings.
MIL-DTL-70329/1 - Nut, Plain Round, Ball And Roller Bearings Narrow Series, Metric
MIL-M-12135/5 - Washer, Spring Tension, Curved, Spring Steel
MIL-N-21337 - Nut, Plain, Round, Retaining, Ball And Roller Bearings
This specification covers procurement requirement for slotted retaining round plain nuts for use in assemblies with ball and roller bearings.
MIL-N-24129 - Nut, Self-Locking, Hexagon, (Plastic Insert) 250 Deg F (Use Mil-N-25027)
MIL-N-24129/1 - Nut, Self-Locking (Plastic Insert), Hexagon, Regular Height, 250 Degrees F., Nickel-Copper Alloy (S/S By Ms17828)
MIL-N-24129/2 - Nuts, Self-Locking (Plastic Insert) Hexagon, Regular Height, 250 Degrees F. (For Grade 8 Steel Bolting) (S/S By Ms17829)
MIL-N-24129/3 - Nut, Self-Locking (Plastic Insert), Hexagon, Regular Height, 250 Degrees F., Fs303 Corrosion Resistant Steel (S/S Ms17830)
MIL-N-24129/4 - Nut, Self-Locking, (Plastic Insert), Hexagon, Heavy, Thin, Unc 3B, Austenitic Corrosion Resistant Steel, Nonmagnetic, 250 Degrees F (S/S By Ms16228)
MIL-N-3336 - Nut, Sheet Spring, Instrument Mounting
This specification covers certain design and all performance, Requirements for the procurement of clip-in, self-locking nuts for installing flange-mounted instruments.
MIL-N-3337 - Nut, Sheet Spring
This specification controls requirements of nuts manufactured from sheet metal with an aperture capable of receiving, gripping and securely holding threaded fasteners and related items.
MIL-N-45938 - Nut, Plain, Clinch And Nut, Self-Locking, Clinch, General Specification For (S/S By Nasm45938)
MIL-N-45938/1 - Nut, Plain, Clinch (Self-Clinching, Round) (S/S By Nasm45938/1)
MIL-N-45938/10 - Nut, Plain, Clinch And Nut, Self Locking, Clinch (Self Clinching) Round (S/S By Nasm45938/10)
MIL-N-45938/12 - Nut, Plain, Spline, Round (S/S By Nasm45938/12)
MIL-N-45938/13 - Nut, Plain, Clinch And Nut, Self-Locking, Clinch (Self-Clinching, Knurled Collar, Miniature, Floating, 450 Degree F And 600 Degree F) (S/S By Nasm45938/13)
MIL-N-45938/14 - Nut, Plain, Clinch And Nut, Self-Locking, Clinch (Self-Clinching, Knurled Collar, Floating, 450 Deg. F 600 Deg. F) (S/S Bynasm45938/14)
MIL-N-45938/2 - Nut, Plain, Clinchcvand Nut, Self Locking, Clinch (Hexagon Head And Shank, Swage Clinch) (S/S By Nasm45938/2)
MIL-N-45938/3 - Nut, Plain, Clinch And Nut, Self-Locking, Clinch (Self-Clinching, Knurled Collar, 450 Deg. F. And 600 Deg. F.) (S/S By Nasm45938/3)
MIL-N-45938/4 - Nut, Plain, Clinch (Self-Clinching, Flush) (S/S By Nasm45938/4)
MIL-N-45938/5 - Nut, Self-Locking, Clinch (Swage-Clinching, Knurled Shank, Miniature, 250 Deg. F) (S/S By Nasm45938/5)
MIL-N-45938/6 - Nut, Self-Locking, Clinch, (Swage-Clinching, Knurled Shank, Miniature, 450 Deg. F, Or 800 Deg. F) (S/S By Nasm45938/6)
MIL-N-45938/7 - Nut, Plain Clinch And Nut, Self-Locking Clinch (Knurled Collar, Miniature, 450 Deg. F) (S/S By Nasm45938/7)
MIL-N-45938/8 - Nut, Self Locking, Clinch (Swage Clinching, Knurled Shank, 250 Deg. F) (S/S By Nasm45938/8)
MIL-N-45938/9 - Nut, Self Locking, Clinch (Swage Clinching, Knurled Shank, 250 Deg. F, Unjf-3B) (S/S By Nasm45938/9)
MIL-N-58086 - Nut, Self-Locking, Double Hexagon, 1200 Deg F.
MIL-N-6034 - Nuts, Hexagonal (Use Ff-N-836)
MIL-N-8056 - Nut, Self Locking, Free Spinning, 1200 Deg F
MIL-N-82512 - Nut, Clinch
This specification covers the general requirements for clinch corrosion resisting steel nuts used to provide a wear resistant thread in soft metals.
MIL-N-85353 - Nuts (Fasteners), Internally Threaded, Preload Locking, 450 Deg. F, 800 Deg. F And 1200 Deg. F, General Specification For (S/S By Nasm85353)
MIL-N-85353/1 - Nut (Fastener), Internally Threaded, Hexagon, Reduced Height 125 Ksi And 200 Ksi Ftu, 450 Deg. F (S/S By Nasm85353/1)
MIL-N-85353/2 - Nut, Preload Locking, Extended Washer, Hexagon, Reduced Height, Cres 125 Ksi 450 Deg. F And 1200 Deg. F (S/S By Nasm85353/2)
MIL-N-85615 - Nut, Sealing, Self-Locking, 250 Degrees F, 450 Degrees F General Specification For
This specification establishes the requirements for the manufacture and acceptance of self-locking nuts for sealing fluids in temperatures up to 250 degrees F and 450 degrees F.
MIL-N-85729 - Nut, Self-Locking, A-286, 160 Ksi Ftu, 450 Degrees F, General Specification For
This specification covers self-locking A-286 corrosion resistant nuts for use in temperatures up to and including 450 degrees F, in conjunction with expandable shank bolts conforming to MIL-B-85667.
MIL-N-85729/1 - Nut, Self-Locking, Assembled Washer, A-286, 160 Ksi Ftu, 450 Degrees F, Spline Wrenching Element
MIL-N-85730 - Nut, Self-Locking, Spline Drive, Assembled Washer, Nickel Alloy 718, 220 Ksi Ftu, 900 Deg. F, General Specification For (S/S By Nasm85730)
MIL-N-85730/1 - Nut, Captive Washer, Self-Locking, Nickel Alloy 718, 220 Ksi Ftu,900 Degree (12-Spline)Wrenching Element (S/S By Nasm85730/1)
MIL-N-85754 - Nut, Self-Locking, Spanner
MIL-N-85754/1 - Nut, Self-Locking, Spanner, Aluminum
MIL-N-8922 - Nut, Self-Locking, Alloy Steel, 220 Ksi Ftu, 450 Deg. F, General Specification For (S/S By Nasm8922)
This specification covers the requirements for alloy steel nuts for use with MIL-B-8906 Bolts.
MIL-N-8922/1 - Nut, Self-Locking, Assembled Washer, Alloy Steel, 220 Ksi Ftu, 450 Deg. F, (12-Spline Wrenching Element) (S/S By Nasm8922/1)
MIL-N-8984 - Nut, Self-Locking, Steel, 260 Ksi Ftu, 450 Deg. F (S/S By Nasm8984)
This specification covers self-locking, alloy steel nuts for use in temperatures up to and including 450 deg. F, in conjuction with tensile bolts and screws having class UNJF-3A threads conforming to MIL-S-8879.
MIL-N-8985 - Nut, Self Locking Steel, 180 Ksi Ftu, 450 Degree F (S/S By Nasm8985)
This specification covers self-locking, alloy steel nuts for use in temperatures up to and including 450 deg. F, in conjunction with tensile bolts and screws having class UNJF-3A threads conforming to MIL-S-8879.
MIL-N-8985/2 - Nuts, Shear, Self-Locking, Steel, 180 Ksi Ftu, 450 Deg. F
MIL-N-8985/3 - Nut, Captive Washer, Self-Locking, Steel, 180 Ksi Ftu, 450 Deg. F, (12-Spline) Wrenching Element
MIL-S-933 - Screws, Machine, Cap And Set, And Nuts (Use Ff-S-85, Ff-S-86, Ff-S-92, Ff-S-103 And Ff-N-836 As Applicable)
MIL-STD-1764 - Washer Preferred For Design, Listing Of
This standard provides a listing of preferred washers encompassing the following characteristics: a. Configuration b. Size c. Materials d. Protective Coatings and Finishes.
MIL-W-1085 - Washer, Flat (Iron And Steel) (Use Ff-W-92)
MIL-W-1165 - Washer, Brass (S/S By Ff-W-92)
MIL-W-12133 - Washer, Spring Tension, General Specification For
This specification covers washers, spring tension, Belleville spring, wave and curved.
MIL-W-12133/1 - Washer, Spring Tension, Belleville Spring, Spring Steel
MIL-W-12133/2 - Washer, Spring Tension, Belleville Spring, Corrosion Resistant Steel
MIL-W-12133/3 - Washer, Spring Tension, Wave, Cooper-Beryllium
MIL-W-12133/4 - Washer, Spring Tension, Wave, Cres 302
MIL-W-12133/5 - Washer, Spring Tension, Curved, Spring Steel
MIL-W-12133/6 - Washer, Spring Tension, Wave, Spring Steel
MIL-W-12133/7 - Washer, Spring Tension, Finger Type, Steel
MIL-W-12133/8 - Washer, Spring Tension, Curved, Cres, 302
MIL-W-12133/9 - Washer, Spring Tension, Curved, Copper, Beryllium
MIL-W-13809 - Washer, Bearing, Ball Or Roller W/Bucket And Gun
MIL-W-19016 - Washer, Plumbing
MIL-W-45595 - Washers, Shouldered, Recessed, Saddle, Concave And Convex (S/S By Nasm45595)
MIL-W-45595/1 - Washer, Shouldered, Polyamide (Nylon) (S/S By Nasm45595/1)
MIL-W-45595/2 - Washer, Shouldered, Polytetrafluoroethylene (S/S By Nasm45595/2)
MIL-W-45595/3 - Washer, Recessed, Aluminum Alloy (S/S By Nasm45595/3)
MIL-W-45595/4 - Washer, Saddle, Steel, Carbon (S/S By Nasm45595/4)
MIL-W-45595/5 - Washer, Saddle, Aluminum Alloy (S/S By Nasm45595/5)
MIL-W-45595/6 - Washer, Convex, Steel, Alloy (S/S By Nasm45595/6)
MIL-W-45595/7 - Washer, Concave, Steel, Alloy (S/S By Nasm45595/7)
MIL-W-45595/8 - Washer, Shouldered, Phenolic (S/S By Nasm45595/8)
MIL-W-45595/9 - Washer, Shouldered, Glass Filled Nylon (S/S By Nasm45595/9)
MIL-W-48105 - Washer
MIL-W-70336/5 - Washer, Lock, External Tooth (Metric)
MS122026THRUMS122075 - ( Images) Washer - Lock, Spring (S/S By Sae-As122026Thruas122075)
MS14144 - ( Images) Nut, Self-Locking, Lightweight, Castellated, 450 Deg. F (S/S By Nasm14144)
MS14145 - ( Images) Nut, Self-Locking, Lightweight, Thin, Castellated, 450 Deg. F (S/S By Nasm14145)
MS14146 - ( Images) Nut, Self-Locking, Castellated, Hexagon, C'Bored, Captive Washer, 450 Deg. F
MS14151 - ( Images) Washer, Flat, Round, Corrosion Resisting Steel (For Electrical Applications) (S/S By Nasm14151)
MS14155 - ( Images) Washer, Recessed Countersunk Two Surfaces, For Use With Wheel Bolts And Nuts Up To And Including 180 Ksi Ftu (S/S By Nasm14155)
MS14156 - ( Images) Nut, Wheel, Self-Locking, Flanged, Steel, 180 Ksi Ftu, 450 Deg. F, Spline Drive (S/S By Nasm14156)
MS14164 - ( Images) Nut, Wheel, Self-Locking, Flanged, Steel, 220 Ksi Ftu, 450 Deg. F Spline, Drive (S/S By Nasm14164)
MS14177 - ( Images) Washer, Recessed, Countersunk Two Surfaces, For Use With Wheel Bolts And Nuts Up To And Including 220 Ksi Ftu (S/S By Nasm14177)
MS14179 - ( Images) Nut, Plate, Self-Locking, Floating, Two Lug, Reduced Rivet Spacing, Steel, (Polyamide Insert) 500 Cycles Reuse, Replaceable Nut, 160 Ksi Ftu, 450 Deg. F (S/S By Nasm14179)
MS14180 - ( Images) Nut Replacement For Self-Locking Plate, Floating, Two Lug, Steel, (Vespel*Insert) 500 Cycles Reuse 160 Ksi Ftu, 450 Deg. F.
MS14182 - ( Images) Nut, Self-Locking, Extended Washer, Round, Nickel Alloy 718, 220 Ksi Ftu, 450 Degree F And 800 Degree F, Spline Drive (S/S By Nasm14182)
MS14183 - ( Images) Washer, Countersunk And Plain, For Use With Bolts And Nuts Up To And Including 220 Ksi Ftu (S/S By Nasm14183)
MS14194 - Nuts (Fasteners), Internally Threaded, Preload Locking, 450 Deg. F, 800 Deg. F, 1200 Deg. F, Reliability And Maintainability Design Requirements For
MS14199 - Nut Assembly, Floating, Self-Locking, Rivetless, Attached Retention Element, (A.R.E.), Maintainability And Reliability Design And Usage Limitations For
MS14200 - ( Images) Nut, Floating, Self Locking, Attached Retention Element (A.R.E.) 450 Deg. F, Steel, 125 Ksi Ftu, Replaceable Nut Element (S/S By Nasm14200)
MS14201 - ( Images) Nut, Floating, Self Locking, Attached Retention Element (A.R.E.), 450 Deg. F, Steel, 125 Ksi Ftu, Replaceable Nut Element, 1/64 Oversize Repair (Ss By Nasm14201)
MS14210 - ( Images) Nut,Floating, Self Locking, Attached Retention Element (A. R. E), 450 Deg. F, Cres (A-286), 125 Ksi Ftu, Replaceable Nut Element (S/S By Nasm14210)
MS14211 - ( Images) Nut, Floating, Self Locking, Attached Retention Element (A.R.E.), 450 Deg. F, Cres (Astm-A286), Ksi Ftu, Replaceable Nut Element, 1/64 Oversize Repair
MS14213 - ( Images) Nut Element, Replaceable, Attached Retention Element (A.R.E.), 450 Deg. F. Cres (A-286), 125 Ksi Ftu (S/S By Nasm14213)
MS14214 - ( Images) Nut Element, Attached Retention Element (A.R.E.), 450 Deg. F, Steel (Aisi 1050 Or 4130), 125 Ksi Ftu (S/S By Nasm14214)
MS14222 - ( Images) Nut, Self-Locking, 450 Deg. F, Hexagon, Reduced Head Height, Ring Base, Corrosion Resistant Steel (S/S By Nasm14222)
MS14226 - ( Images) Washer, Flat, For Oversize Fasteners And Fastener Sleeve
MS14228 - ( Images) Nut, Plate Assembly, Floating, Self-Locking, Attached Retention Element (A.R.E.) Counterbore, 450 Degree Alloy Steel, 125 Ksi Ftu, Replaceable Nut Element (S/S By Ms14200)
MS14229 - ( Images) Nut, Plate Assembly, Floating, Self-Locking, Attached Retention Element (A.R.E.) Counterbore, 450 Degree Alloy Steel, 125 Ksi Ftu, Replaceable Nut Element, 1/64 Oversize Repair (S/S By Ms14201)
MS14491 - ( Images) Nut, Wheel, Self-Locking, Flanged, Nickel Alloy 718, 220 Ksi Ftu, 450 Deg. F, Spline Drive (S/S By Nasm14491)
MS14493 - ( Images) Nut, Self-Locking, Channel, Floating, Carbon Steel, 125 Ksi, Ftu (S/S By Nasm14493)
MS15178 - Washer, Fiber, Cap Nut (For Pressed Metal Lavatory)
MS15180 - Washer, Brass, Diaphram (For Pressed Metal Lavatory)
MS15795 - ( Images) Washer, Flat-Metal, Round, General Purpose (S/S By Nasm15795)
MS15820 - Washer, Lock Special Design, Galvanized Steel
MS15983 - ( Images) Nut, Plain, Plate, Non-Countersunk
MS16203 - Nut, Plain, Hexagon, And Hexagon Jam, Unc-2B, Nonmagnetic
MS16210 - Nut, Plain, Hexagon, Machine Screw, Unc-2B, Nonmagnetic (Use Ms-35649)
MS16211 - ( Images) Nuts, Plain, Square, Regular, Unfinished, Copper-Silicon Alloy, Unc-2B Nonmagnetic
MS16212 - ( Images) Washers, Flat, Metal, Round, Medium Series, Nonmagnetic
MS16213 - Washer, Lock, Flat, External Tooth, Nonmagnetic
MS16214 - Washer, Lock, Spring, Nonlink, Medium Series, Non-Magnetic (S/S By Ms35338)
MS16228 - ( Images) Nut, Self-Locking, Hexagon-Thin, Unc 3B (Non Metallic Insert) Austenitic Corrosion Resistant Steel, Nonmagnetic, 250 Deg. F (S/S By Nasm16228)
MS16285 - ( Images) Nuts, Hexagon, Semifinished, Heavy, Unc-2B And 8N-2B, High Temperature - To 1000 Deg. F
MS16286 - ( Images) Nuts, Hexagon, Finished, Heavy, Unc-2B And 8N-2B, High Temperature - To 1000 Deg. F
MS16994 - ( Images) Nut, Plain, Knurled
MS17186 - ( Images) Washer, Drive (Synchro)
MS17187 - ( Images) Nut, Plain, Hexagon
MS17188 - ( Images) Washer, Flat (Round), Cres
MS172201THRUMS172235 - ( Images) Washer, Key - Single, Bearing Retaining, Ams6350 (Asg) (S/S By Sae-As172201Thruas172235)
MS172236THRUMS172270 - ( Images) Nut, Spanner, Bearing Retaining, Aeronautical (Asg) (S/S By Sae-As172236Thruas172270)
MS172271THRUMS172320 - Washer, Key - Single, Ams 6350 (Asg) (S/S By Sae-As172271Thruas172320)
MS172321THRUMS172370 - ( Images) Nut - Spanner, Aeronautical (S/S By Sae-As172321Thruas172370)
MS17354 - Nut-Plain, Hex, Boss Connection, Aluminum (Mil-S-8879 Thread)
MS17825 - ( Images) Nut, Self-Locking, Castellated, Hexagon, .250 Degrees F Non-Metallic Insert
MS17826 - ( Images) Nut, Self-Locking, Castellated, Hexagon 250 Deg. F, Thin Non-Metallic Insert
MS17828 - ( Images) Nut, Self-Locking, Hexagon, Regular-Height, (Non-Metallic Insert) 250 Deg. F, Nickel-Copper Alloy (S/S By Nasm17828)
MS17829 - ( Images) Nut, Self-Locking, Hexagon, Regular Height, 250 Deg. F., (Non Metallic Insert) Non-Corrosion-Resistant Steel (S/S By Nasm17829)
MS17830 - ( Images) Nut, Self-Locking, Hexagon-Regular, 250 Deg. F, And 450 Deg. F (Non-Metallic Insert), 300 Series Corrosion Resistant Steel (S/S Nasm17830)
MS17973 - Washer, Aircraft Generator Retaining Stud
MS17980 - Magnetic Particle Indications On Steel Nuts (Use Mil-S-1222)
MS19067 - ( Images) Nuts, Plain, Round, Retaining, Ball And Roller Bearing, Light Series
MS19068 - ( Images) Nuts, Plain, Round, Retaining, Ball And Roller Bearing Regular Series
MS19069 - ( Images) Washer, Key, Retaining, Ball And Roller Bearing, Light Series
MS19070 - ( Images) Washer, Key Retaining, Ball And Roller Bearing, Regular Series
MS20002 - ( Images) Washer, Countersunk And Plain, High Strength (S/S By Nasm20002)
MS20341 - Nut, Plain, Hexagon, Electrical (Asg) (Use Ms 35649 And Ms 35650)
MS20364 - ( Images) Nut, Self Locking, Thin, 250 Deg. F (Use Ms21042, Ms 21083 Or Ms 21245)
MS20365 - ( Images) Nut, Self-Locking, 250 Deg. F (Asg) (S/S By Ms21042)
MS20500 - ( Images) Nut, Self Locking, Hexagon, 1200 Degrees F, 125 Ksi Ftu
MS20501 - ( Images) Nut, Self Locking, Plate, Two Lug, 1200 Deg. F, 125 Ksi Ftu (S/S By Nasm20501)
MS20503 - Nut-Self Locking, Free Spinning, 1200 Deg. F (S/S By Ms20500)
MS21025 - ( Images) Nut, Castellated, Hexagon (S/S By Nasm21025)
MS21040 - Nut, Self-Locking, 500 Deg. F, Hexagonal, Reduced Height (Superseded By Ms21042)
MS21042 - ( Images) Nut, Self-Locking, 450 Deg. F, Reduced Hexagon, Reduced Height, Ring Base, Non-Corrosion Resistant Steel (S/S By Nasm21042)
MS21043 - ( Images) Nut, Self-Locking, 800 Deg. F, Reduced Hexagon, Reduced Height, Ring Base, Corrosion Resistant Steel (S/S By Nasm21043)
MS21044 - ( Images) Nut, Self-Locking, Hexagon, Regular Height, 250 Deg. F, 125 Ksi Ftu And 60 Ksi Ftu (S/S By Nasm21044)
MS21045 - ( Images) Nut, Self-Locking Hexagon-Regular Height, 450 Deg. F, 125 Ksi Ftu (S/S By Nasm21045)
MS21046 - ( Images) Nut, Self Locking, Hexagon-Regular Height, 800 Deg. F, 125 Ksi Ftu (Asg) (S/S By Nasm21046)
MS21047 - ( Images) Nut, Self-Locking, Plate, Two-Lug, Low Height, Steel, 125 Ksi Ftu, 450 Deg. F (S/S By Nasm21047)
MS21048 - ( Images) Nut, Self-Locking, Plate, Two Lug, Low Height, Cres, 125 Ksi Ftu, 450 Deg. And 800 Deg. F. (S/S By Nasm21048)
MS21049 - ( Images) Nut, Self-Locking, Plate, Two Lug, 100 Deg. Csk Low Height, Steel, 125 Ksi Ftu, 450 Deg. F. (S/S By Nasm21049)
MS21050 - ( Images) Nut, Self-Locking, Plate, Two Lug, 100 Deg Csk. Low Height, Cres, 125 Ksi Ftu, 450 Deg And 800 Deg F (S/S By Nasm21050)
MS21051 - ( Images) Nut, Self-Locking, Plate, One Lug, Low Height, Steel, 125 Ksi Ftu, 450 Deg. F (S/S By Nasm21051)
MS21052 - ( Images) Nut, Self-Locking, Plate, One Lug, Low Height, Cres, 125 Ksi Ftu, 450 Deg And 800 Deg F (S/S By Nasm21052)
MS21053 - ( Images) Nut, Self-Locking, Plate, One Lug, 100 Deg. Csk Low Height, Alloy Steel, 125 Ksi Ftu, 450 Deg. F (S/S By Nasm21053)
MS21054 - ( Images) Nut, Self-Locking, Plate, One Lug, 100 Deg. Csk, Low Height, Cres, 125 Ksi Ftu, 450 Deg. And 800 Deg. F (S/S By Nasm21054)
MS21055 - ( Images) Nut, Self-Locking, Plate, Corner, Low Height, Steel, 125 Ksi Ftu, 450 Deg. F (S/S By Nasm21055)
MS21056 - ( Images) Nut, Self-Locking, Plate, Corner, Low Height, Cres, 125 Ksi Ftu, 450 Deg. And 800 Deg. F. (Asg) (S/S By Nasm21056)
MS21057 - ( Images) Nut, Self-Locking, Plate, Corner, 100 Deg. Csk, Low Height, Alloy Steel, 125 Ksi Ftu, 450 Deg. F. (S/S By Nasm21057)
MS21058 - ( Images) Nut, Self-Locking, Plate, Corner, 100 Deg. Csk, Low Height, Cres, 125 Ksi Ftu, 450 Deg. And 800 Deg. F (S/S By Nasm21058)
MS21059 - ( Images) Nut, Self-Locking, Plate, Two Lug, Floating, Low Height Steel, 125 Ksi Ftu, 450 Deg. F (S/S By Nasm21059)
MS21060 - ( Images) Nut, Self-Locking, Plate, Two Lug, Floating, Low Height, Cres, 125 Ksi Ftu, 450 Deg. And 800 Deg. F. (Asg) (S/S By Nasm21060)
MS21061 - ( Images) Nut, Self-Locking, Plate, One Lug, Floating, Low Height, Steel, 125 Ksi Ftu, 450 Deg. F (S/S By Nasm21061)
MS21062 - ( Images) Nut, Self-Locking, Plate, One Lug, Floating, Low Height, Cres, 125 Ksi Ftu, 450 Deg. And 800 Deg. F. (Asg) (S/S By Nasm21062)
MS21063 - ( Images) Nut, Self-Locking Gang Channel, Floating, Low Height, Steel, 125 Ksi Ftu, 250 Deg. F (S/S By Nasm21063)
MS21064 - ( Images) Nut, Self-Locking Gang Channel, Floating, Low Height, Steel, 125 Ksi Ftu, 450 Deg. F (S/S By Nasm21064)
MS21065 - ( Images) Nut, Self-Locking, Channel, Floating, Low Height, Cres, 125 Ksi Ftu, 450 Deg. F And 800 Deg. F (S/S By Nasm21065)
MS21066 - ( Images) Nut, Self-Locking Gang Channel, 100 Deg. Csk, Floating, Low Height, Steel, 125 Ksi Ftu, 250 Deg. F (S/S By Nasm21066)
MS21067 - ( Images) Nut, Self-Locking Gang Channel, 100 Deg. Csk, Floating, Low Height, Steel, 125 Ksi Ftu, 450 Deg. F (S/S By Nasm21067)
MS21068 - ( Images) Nut, Self-Locking, Channel, 100 Deg Csk, Floating, Low Height, Cres, 125Ksi Ftu, 450 Deg F And 800 Deg F (S/S By Nasm21068)
MS21069 - ( Images) Nut, Self-Locking, Plate, Two-Lug, Reduced Rivet Spacing, Low Height, Steel, 125 Ksi Ftu, 450 Deg. F (S/S By Nasm21069)
MS21070 - ( Images) Nut, Self-Locking, Plate, Two Lug, Reduced Rivet Spacing, Low Height, Cres, 125 Ksi Ftu, 450 Deg F And 800 Deg F (S/S By Nasm21070)
MS21071 - ( Images) Nut, Self-Locking, Plate, One Lug, Reduced Rivet Spacing, Low Height, Steel, 125 Ksi Ftu, 450 Deg. F (S/S By Nasm21071)
MS21072 - ( Images) Nut, Self-Locking, Plate, One Lug, Reduced Rivet Spacing, Low Height, Cres, 125 Ksi Ftu, 450 Deg. F And 800 Deg. F (S/S By Nasm21072)
MS21073 - ( Images) Nut, Self-Locking, Plate, Corner, Reduced Rivet Spacing, Low Height, Steel, 125Ksi Ftu, 450 Deg. F (S/S By Nasm21073)
MS21074 - ( Images) Nut, Self-Locking, Plate, Corner, Reduced Rivet Spacing, Low Height, Cres, 125 Ksi, Ftu, 450 Deg F And 800 Deg F (S/S By Nasm21074)
MS21075 - ( Images) Nut, Self-Locking, Plate, Two Lug, Floating, Reduced Rivet Spacing, Low Height, Steel, 125 Ksi Ftu, 450 Deg. F (S/S By Nasm21075)
MS21076 - ( Images) Nut, Self-Locking, Plate, Two Lug, Floating, Reduced Rivet Spacing, Low Height, Cres, 125 Ksi Ftu, 450 Deg. F And 800 Deg. F (S/S By Nasm21076)
MS21077 - ( Images) Nut, Self-Locking, Plate, Two Lug, Floating, Non-Metallic Insert, Steel, 125 Ksi Ftu, 250 Deg. F (S/S By Nasm21077)
MS21078 - ( Images) Nut, Self-Locking, Plate, Two Lug, Non-Metallic Insert, Steel, 125 Ksi Ftu, 250 Deg. F (S/S By Nasm21078)
MS21079 - ( Images) Nut, Self-Locking, Gang Channel, Non-Metallic Insert, 125 Ksi Ftu, 250 Deg. F (S/S By Nasm21079)
MS21080 - ( Images) Nut, Self-Locking, Plate, One Lug, Non-Metallic Insert, Steel, 125 Ksi Ftu, 250 Deg. F (S/S By Nasm21080)
MS21081 - ( Images) Nut, Self-Locking, Plate, Corner, Non-Mettalic Insert, Steel, 125Ksi Ftu, 250 Deg. F (S/S By Nasm21081)
MS21082 - ( Images) Nut, Self-Locking, Plate, One Lug, Floating, Non-Metallic Insert, Steel, 125 Ksi Ftu, 250 Deg. F (S/S By Nasm21082)
MS21083 - ( Images) Nut, Self-Locking, Hexagon Non-Metallic Insert, Low Height, 250 Deg. F (S/S By Nasm21083)
MS21084 - ( Images) Nut, Self Locking, Steel, 220 Ksi Ftu, 450 Deg. F., Flanged, Ms33787 Wrenching Element (Nasm21084)
MS21085 - ( Images) Nut, Self-Locking, Steel, 260 Ksi Ftu, 450 Deg. F, Flanged, Ms33787 Wrenching Element (S/S By Nasm21085)
MS21086 - ( Images) Nut, Self-Locking, Plate, Side By Side, Reduced Rivet Spacing, Low Height, Steel, 125 Ksi Ftu, 450 Deg. F (S/S By Nasm21086)
MS21087 - ( Images) Nut, Self-Locking, Plate, Side By Side Reduced Rivet Spacing, Low Height, Cres, 125 Ksi Ftu, 450 Deg. And 800 Deg. F (S/S By Nasm21087)
MS21088 - Nut, Self-Locking, Channel, Floating, Low Height, Cres, 125Ksi Ftu, 250 Degrees F (Use Ms21065)
MS21089 - Nut, Self Locking, Channel, 100 Deg. Csk, Floating, Low Height, Cres, 125Ksi Ftu, 250 Deg. Ftu, 250 Deg. F (See Ms 21068)
MS21133 - ( Images) Nut, Self-Locking, Steel, 180 Ksi Ftu, 450 Deg. F, Flanged, Ms33787 Wrenching Element (S/S By Nasm21133)
MS21206 - ( Images) Washer, Countersunk And Plain, For Use With Bolts And Nuts Up To And Including 220 Ksi Ftu
MS21224 - ( Images) Nut, Self-Locking, Castellated, Hexagon, Counterbored, Assembled Washer, 250 Deg. F, Non-Metallic Insert (For Self-Retaining Bolts) (S/S By Nasm21224)
MS21225 - ( Images) Nut, Self-Locking, Castellated, Hexagon - 800 Deg. F (S/S By Nasm21225)
MS21244 - ( Images) Nut, Castellated, Hexagon, Counterbored Assembled Washer, 450 Deg. F (For Self Retaining Bolts) (S/S By Nasm21244)
MS21245 - ( Images) Nut, Self-Locking, Hexagon, Thin, 450 Degree F, 80 Ksi Ftu (S/S By Nasm21245)
MS21258 - ( Images) Washer, Key, Retaining, Wheel Bearing (S/S By Nasm21258)
MS21264 - ( Images) Nut Drilled Jam
MS21299 - ( Images) Washer, Countersunk And Plain, For Use With Bolts And Nuts Up To And Including 260 Ksi Ftu (S/S By Nasm21299)
MS21302 - Nut, Eye (Oval)
MS21303 - ( Images) Nut, Eye, Thimble Hot Dip Galvanized (Pole Line)
MS21304 - ( Images) Nut, Plain, Square
MS21305 - Washer, Cushion, Round
MS21306 - ( Images) Washer, Flat (Round)
MS21307 - ( Images) Washer, Flat (Square)
MS21308 - ( Images) Washer, Saddle Square, Curved (Pole Line)
MS21331 - Nut, Plain, Clinch
MS21340 - ( Images) Nut, Plain, Hexagon, Electrical, Thin (With Lockwire Holes)
MS21392 - ( Images) Nut, Plain, Hexagon-Azimuth (With Lockwire Holes) (S/S By Nasm21392)
MS21441 - ( Images) Bearing, Roller, Needle, Track Roller, Integral Heavy Stud, Sealed, Type Ix, Antifriction, Inch (S/S By Sae-As21441)
MS21448 - ( Images) Nut, Self-Locking, Plate, Spacer, Light To Medium Duty
MS21450 - ( Images) Nut, Self-Locking, Extended Washer, Hexagon, Reduced Hexagon, C'Bore
MS24017 - ( Images) Nut Plain, Hexagon, Mounting
MS24127 - ( Images) Nut-Plain, Hexagon, Nylon
MS24400 - Nut, Plain, Hexagon-Bulkhead And Universal Fitting Mounting, Precision Type (S/S By An924)
MS24679 - ( Images) Nut, Plain, Cap, Low Crown, Unc-2B And Unf-2B (S/S By A-A-55629)
MS24680 - ( Images) Nut, Plain, Cap, High Crown Unc-2B And Unf-2B (S/S By A-A-55628)
MS24689 - Nut, Plain, Hexagon, Track (S/S By Ansi-B18.10 Now Asme-B18.10)
MS25081 - ( Images) Washer, Key
MS25082 - ( Images) Nut, Plain, Hexagon, Electrical-Thin
MS25196 - Seal, Bushing, External (S/S By Mil-B-5423/16 Now Mil-Dtl-5423/16)
MS25440 - ( Images) Washers, For Use With Aircraft Aluminum Terminals (S/S By Nasm25440)
MS27040 - ( Images) Nut, Plain, Square-Steel, Cadmium Plated
MS27051 - Washer, Slotted
MS27111 - Washer, Key, Flat, General Purpose
MS27112 - Washer, Key-Bent Tab, General Purpose (Use Ms172271 Thru Ms172320)
MS27127 - ( Images) Nut, Welding - Without Pilot
MS27128 - ( Images) Nut, Welding-Pilot
MS27129 - ( Images) Washer, Finishing-Countersunk
MS27130 - ( Images) Nut, Plain, Blind Rivet-Flat And Countersunk Head, Open End (S/S By Nas1329 And Nas1330)
MS27131 - ( Images) Nut, Plain, Blind Rivet-Flat Head, Closed End (S/S By Nas1329)
MS27151 - ( Images) Nut, Stamped And Standard Type
MS27183 - ( Images) Washer, Flat (Round, Steel, Cadmium Plated) General Purpose
MS27952 - ( Images) Nut, Plain-Hexagon, Jam, Left Hand
MS27955 - ( Images) Nut, Plain-Round, Spanner
MS3214 - ( Images) Nut, Plain, Clinch-Flush (S/S By Nasm3214)
MS33538 - Nut, Sheet Spring, Limitations For Usage On Aircraft
MS33588 - ( Images) Nuts, Self-Locking, Aircraft, Reliability And Maintainability Usage Requirements For (S/S By Nasm33588)
MS33737 - ( Images) Nut, Sheet Spring, Instrument Mounting (S/S By Nasm33737)
MS3376 - ( Images) Nut, Self Locking, Reduced Height, Steel, 450 Deg. F, 12 Point, Captive Washer
MS33784 - ( Images) Wrenching Features For Cylindrical Nuts, Design Standard For
MS35134 - Nut, Plain Round
MS35333 - ( Images) Washer, Lock, Flat-Internal Tooth (S/S By Nasm35333)
MS35334 - ( Images) Washer, Lock, Flat, Heavy, Internal Tooth
MS35335 - ( Images) Washer, Lock, Flat-External Tooth
MS35336 - ( Images) Washer, Lock Countersunk, 80 Deg. 82 Deg., External Tooth (In/Mm)
MS35337 - Washer, Lock, Split, Helical, Light Series (S/S By Ms-35338)
MS35338 - ( Images) Washer, Lock-Spring, Helical, Regular (Medium) Series (S/S By Nasm35338)
MS35339 - Washer, Lock, Split, Helical, Heavy Series (S/S By Ms 35340)
MS35340 - ( Images) Washer, Lock-Helical Spring, Extra Duty (Extra-Heavy) Series
MS35425 - ( Images) Nut Plain, Wing, Unc-2B
MS35426 - ( Images) Nut, Plain, Wing, Unf-2B
MS35475 - Nut, Plain, Square, Track (S/S By Ansi-B18.10)
MS35649 - ( Images) Nut, Plain, Hexagon, Machine Screw, Unc-2B (S/S By Nasm35649)
MS35650 - ( Images) Nut, Plain, Hexagon, Machine Screw, Unf-2B (S/S By Nasm35650)
MS35690 - ( Images) Nut, Plain, Hexagon, Unc-2B And Unf-2B
MS35691 - ( Images) Nut, Plain, Hexagon (Jam) Unc-2B And Unf-2B
MS35692 - ( Images) Nut, Slotted, Hexagon, Unc-2B And Unf-2B
MS35790 - ( Images) Washer, Lock-Countersunk, 100 Deg., External Tooth (In./Mm)
MS39057 - Bushing, Sleeve, Cable Adapter, Molded (S/S By Ms3420)
MS45901 - Washer, Flat, Electrical (S/S By An961)
MS45902 - Washer, Recessed (Use An-975)
MS45904 - ( Images) Washer, Lock, Internal And External Tooth
MS45905 - ( Images) Nut, Plain - Hexagon, Finished, Left Hand
MS51092 - ( Images) Washer, Flat
MS51412 - ( Images) Washer, Flat - Round, Steel, General Purpose
MS51413 - ( Images) Washer, Lock, Flat-Internal Tooth
MS51414 - ( Images) Washer, Lock, Flat-External Tooth
MS51415 - ( Images) Washer, Lock-Helical Spring, Regular (Medium) Series
MS51416 - ( Images) Washer, Lock-Helical Spring, Heavy Duty
MS51468 - ( Images) Nut, Plain, Wing, Carbon Steel, Unc-2B
MS51469 - ( Images) Nut, Plain, Hexagon (Machine Screw), Carbon Steel, Unc-2B
MS51470 - ( Images) Nut, Plain, Hexagon (Machine Screw), Carbon Steel, Unf-2B
MS51471 - ( Images) Nut, Plain, Hexagon (Jam), Carbon Steel, Unc-2B
MS51472 - ( Images) Nut, Plain, Hexagon, Carbon Steel, Unc-2B
MS51473 - ( Images) Nut, Plain, Hexagon, Carbon Steel, Unf-2B
MS51496 - ( Images) Washer, Flat-Narrow Series
MS51552 - ( Images) Nut, Self-Locking, Plate, Right Angle Floating, 125 Ksi Ftu 450 Deg.F
MS51553 - ( Images) Nut, Self-Locking, Wing
MS51848 - ( Images) Washer, Lock-Helical Spring, Hi-Collar
MS51857 - ( Images) Nut, Push-On, Steel
MS51858 - ( Images) Nut, Plain Hexagon, Plastic Nylon
MS51859 - ( Images) Washer, Flat-Plastic (Nylon)
MS51865 - ( Images) Nut, Self-Locking, Cap-General Purpose, 250 Deg., F
MS51866 - ( Images) Nut, Self-Locking, Spline-General Purpose, 250 Deg. F
MS51867 - ( Images) Washer, Metal, Flat, Plain, Rectangular
MS51922 - ( Images) Nut, Self-Locking, Hexagon-Prevailing Torque, General Purpose, 250 Deg. F, Unc-2B And Unf-2B (S/S By Mil-Dtl-45913)
MS51936 - ( Images) Washer, Flat (Burr)
MS51941 - ( Images) Nut, Plain, Plate (S/S By A-A-55625)
MS51943 - ( Images) Nut, Self Locking, Hexagon Prevailing Torque, For Critical Installations, 250 Deg. F, Unc-3B And Unf-3B (S/S By Mil-Dtl-45913)
MS51967 - ( Images) Nut, Plain, Hexagon-Carbon Steel, Cadmium Plated, Unc-2B (In./Mm)
MS51968 - ( Images) Nut, Plain, Hexagon-Carbon Steel, Cadmium Plated, Unf-2B (In./Mm)
MS51969 - ( Images) Nut, Plain, Hexagon - Brass, Black Chemical Finish, Unc-2B
MS51970 - ( Images) Nut, Plain, Hexagon-Brass, Black Chemical Finish, Unf-2B
MS51971 - ( Images) Nut, Plain, Hexagon-Steel, Corrosion Resisting, 300 Series, Passivated, Unc-2B
MS51972 - ( Images) Nut, Plain, Hexagon-Steel, Corrosion Resisting, 300 Series, Passivated, Unf-2B
MS51983 - ( Images) Nut, Plain, Single Ball Seat, Hexagon Wheel Mounting-3/4 And 1-1/8 Inch (S/S By A-A-52427)
MS51984 - ( Images) Nut, Plain, Cone Seat, Hexagon: Wheel Mounting, 1/2 Inch
MS51988 - ( Images) Nut, Self-Locking, Flanged, Prevailing Torque, Steel, Cadmium, Unc And Unf
MS52119 - Nut Plain Hexagon (See Revision "B" For Replacement Information)
MS53069 - ( Images) Nut, Plain, Assembled Washer: 7/16 Inch (Floating Type)
MS63040 - Washer, Flat, For Wood (S/S By An970)
MS87016 - Nut, Self Locking, Double Hexagon, 1200 Deg F., 160 Ksi Ftu
MS90132 - Nut, Hex, Used With R.F. Coaxial Connectors
MS90136 - Washer, Spring Tension, Series N Connectors
MS90164 - Washer, Flat, Series N Connectors
MS90217 - ( Images) Washer, Spring, Part Of Rf Coaxial Connectors
MS90221 - ( Images) Washer, Half; Part Of Series G Connectors
MS90415 - ( Images) Nut, Self-Locking, Steel, 160Ksi, 450 Deg. F 12 Point, Captive Washer (S/S By Nasm90415)
MS90723 - ( Images) Nut, Sheet Spring And J Type
MS90724 - ( Images) Nut, Sheet Spring And U Type
MS9081 - ( Images) Washer, Key-Double, Bearing Retaining, Ams 6350
MS9099 - ( Images) Nut - Hex, Boss Connection, Aluminum (S/S By Sae-As90991)
MS9100 - ( Images) Nut - Hex, Boss Connection, Cres (S/S By Sae-As91001)
MS91611 - ( Images) Washer, Spring Tension, Series Lc Connectors
MS91612 - ( Images) Washer, Spring Tension, Series Lc Connectors
MS91820 - ( Images) Washer, Split, Part Of Series C Connectors
MS9200 - ( Images) Nut, Plain, Hex, Boss Connection, Aluminum (S/S By Sae-As92001)
MS9201 - ( Images) Nut, Plain, Hex, Boss Connection, Corrosion Resistant Steel (S/S By Sae-As9201)
MS9274 - ( Images) Washer, Key-Double, Bearing Retaining, Ams 5510
MS9276 - ( Images) Washer, Key-Cres, Ams 5510, 180 Deg. Locking (S/S By Sae-As9276)
MS9320 - ( Images) Washer, Flat - Ams 6350 (S/S By Sae-As9320)
MS9321 - ( Images) Washer, Flat - Ams 5510 (S/S By Sae-As9321)
MS9356 - ( Images) Nut, Plain, Hexagon-A-286 (S/S By Sae-As9356)
MS9357 - ( Images) Nut, Plain, Hexagon - A-286, Silver Plated (S/S By Sae-As9357)
MS9358 - ( Images) Nut, Castellated, Hexagon-A-286 (S/S By Sae-As9358)
MS9359 - ( Images) Nut, Castellated, Hexagon - A-286, Silver Plated (S/S By Sae-As9359)
MS9360 - ( Images) Nut, Plain, Hex-Drilled - A-286, Silver Plated (S/S By Sae-As9360)
MS9361 - ( Images) Nut, Plain, Hexagon, Check-A-286 (S/S By Sae-As9361)
MS9362 - ( Images) Nut, Plain, Hexagon, Check A-286, Silver Plated, Mil-S-8879 (S/S By Sae-As9362)
MS9363 - ( Images) Nut, Slotted, Hexagon-Shear, A-286 (S/S By Sae-As9363)
MS9364 - ( Images) Nut, Slotted, Hexagon - Shear, A-286, Silver Plated, Mil-S-8879 (S/S By Sae-As9364)
MS9482 - ( Images) Washer, Flat - Steel Ams 6437 Or Ams 6485, Diffused Nickel-Cadmium Plated, Countersunk (S/S By Sae-As9482)
MS9549 - ( Images) Washer, Flat - Ams 5510 (S/S By Sae-As9549)
MS9553 - ( Images) Nut Hex, Boss Connection, Cres (S/S By Sae-As9553)
MS9581 - ( Images) Washer, Key-Cres, Ams 5510, 90 Deg. Locking (S/S By Sae-As9581)
MS9582 - ( Images) Washer, Key-Cres, Ams 5510, 270 Deg. Locking (S/S By Sae-As9582)
MS9684 - ( Images) Washer, Cup, Lock - Cres Ams 5510
MS9766 - ( Images) Nut, Double Hexagon, Cupwasher Locked, Ams 5737, Cres
MS9767 - ( Images) Nut, Double Hexagon - Cupwasher Locked, Ams 6322, Cadium Plated Mil-S-8879
MS9768 - ( Images) Washer, Flat-Cres Ams 5525 Or Ams 5737, Countersunk
MS9880 - ( Images) Washer, Cup, Lock - Cres Ams 5510 (S/S By Sae-As9880)
MS9881 - ( Images) Nut, Plain, Hexagon - Ams 6322, Cadmium Plate Mil-S-8879 (S/S By Sae-As9881)
MS9882 - ( Images) Nut, Plain, Hex - Drilled, Ams 6322, Cadmium Plate Mil-S-8879 (S/S By Sae-As9882)
MS9951 - ( Images) Nut, Spanner End Slots, Cupwasher Locked, Steel Ams6322, Mil-S-8879
MS9952 - ( Images) Washer, Cup, Lock - Expander Nut Cres, Ams 5846
MS9984 - Nut, Spanner, End Slots, Cupwasher Locked, A-286, Silver Plated, Mil-S-8879
NA0009 - Nuts, Self Locking, 235 Deg. C, Metric
NA0027ANDNA0028 - Nut, Self-Locking, Floating, Plate, Two-Log, Metric Low Height, C'Bored, 1100 Mpa 235 Deg. C, 425 Deg. C
NA0029ANDNA0030 - Nut, Self-Locking, Spline Drive 1250 Mpa, 235 Deg. C, 425 Deg. C, Metric
NA0033ANDNA0034 - Nut, Self-Locking, Hexagon Extended Washer 1100 Mpa, Metric, 235 Deg. C, 425 Deg. C
NA0040ANDNA0041 - Nut, Self-Locking, Plate, Two Lug, Fixed Low Height, C'Bored, 1100 Mpa, Metric 235 Deg. C, 425 Deg. C
NA0044 - Nut, Self Locking, 425 Deg. C, Metric
NA0049 - Nut, Self-Locking, Castellated Reduced Hexagon, 600 Mpa Shear, Metric
NA0050 - Nut, Self-Locking, Castellated, Reduced Hexagon, 1100 Mpa Tensile, Metric
NA0061 - Nut, Self-Locking, Spline Drive, Alloy Steel, 1800 Mpa, 235 Degrees C, Metric
NA0062 - Bolt, Alloy Steel, 1550 Mpa Tensile, Spline Drive, Metric
NA0064THRUNA0066 - Nut, Thin, With Optional Lockwire Hole, Metric
NA0073ANDNA0074 - Nut, Self-Locking, Plate, One Lug, Metric, Floating Low Height, C'Bored, 1100 Mpa, 235 Deg. C, 425 Deg. C
NA0077ANDNA0078 - Nut, Self-Locking, Plate, Fixed, One Lug Reduced Rivet Spacing, Low Height, C'Bored, 1100 Mpa, Metric 235 Degrees C, 425 Degrees C (S/S By Na0077 And Na0078)
NA0079ANDNA0080 - Nut, Self-Locking, Plate, Fixed, Two Lug, Reduced Rivet Spacing, Low Height, C'Bored, 1100 Mpa, Metric, 235 Degrees C, 425 Degrees C (S/S By Na0079 And Na0080)
NA0081ANDNA0082 - Nut, Self-Locking, Plate, Fixed, Corner, Reduced Rivet Spacing, Low Height, C'Bored, 100 Mpa, Metric 235 Degrees C, 425 Degrees C (S/S By Na0081 And Na0082)
NA0083ANDNA0084 - Nut, Self-Locking, Plate, Fixed, Side By Side Reduced Rivet Spacing, Low Height, C'Bored, 1100 Mpa, Metric 235 Degrees C, 425 Degrees C (S/S By Na0084)
NA0085ANDNA0086 - Nut, Self-Locking, Plate, Floating, Two Lug Reduced Rivet Spacing, Low Height, C'Bored, 1100 Mpa Metric 235 Deg. C, 425 Deg. C
NA0087ANDNA0088 - Nut, Self-Locking, Plate, Floating, Side By Side, Reduced Rivet Spacing, Low Height, C'Bored, 1100 Mpa, Metric, 235 Deg. C, 425 Deg. C
NA0093ANDNA0094 - Nut, Self-Locking, Floating, Plate, Corner Low Height, C'Bored, 1100 Mpa, Metric 235 Deg. C, 425 Deg. C
NA0095ANDNA0096 - Nut, Self-Locking, Plate, Corner Low Height, C'Bored, 1100 Mpa, Metric 235 Degrees C, 425 Degrees C (S/S By Na0095 And Na0096)
NA0133 - Nut, Self-Locking, Barrel, Floating, 1550 Mpa, Metric
NA0134 - Retainer, Nut, Floating Barrel, Metric
NA0140THRUNA0144 - Washer, Dimpled, 100 Deg., Metric
NAS1023 - Nut, Self-Locking, Plate-Two Lug, Regular Height, Non-Csk
NAS1024 - Nut, Self-Locking, Plate-Two Lug, Regular Height, Csk
NAS1025 - Nut, Self-Locking, Plate-One Lug, Regular Height, Non-Csk
NAS1026 - Nut, Self-Locking, Plate - One Lug, Regular Height, Csk
NAS1027 - Nut, Self-Locking, Plate-Corner, Regular Height, Non-Csk
NAS1028 - Nut, Self-Locking, Plate - Corner, Regular Height, Csk
NAS1029 - Nut, Self-Locking, Plate - Two Lug, Regular Height, Bevel Seat
NAS1030 - Nut, Self-Locking, Plate - One Lug, Regular Height, Non-Csk, Bevel Seat
NAS1031 - Nut, Slef-Locking, Plate-Two Lug, Regular Height, Floating
NAS1032 - Nut, Self-Locking, Plate-Corner, Regular Height, Non-Csk, Floating
NAS1034THRUNAS1038 - Nut, Assembly, Self-Locking, Gang Channel - Regular Height, Non-Csk
NAS1039THRUNAS1041 - Nut Assembly, Self-Locking, Gang Channel-Regular Height, Csk
NAS1070 - Washer, Plain, Oversize For Aluminum Terminals
NAS1149 - Washer, Flat
NAS1410 - Nut, Universal Port Fitting
NAS1512ANDNAS1513 - Nut Assembly, Self-Locking, Gang Channel - Low Height, C'Bore, Miniature
NAS1640 - Washer, Lock, Spring, Non-Magnetic
NAS1676 - Washer, Lock-Spring, Helical, Hi-Collar
NAS1726 - Nut, Self Locking, Captive Washer, Shear Type, 450 Deg. F And 800 Deg. F
NAS1727 - Nut, Washer, Self Aligning, 450 Degrees F & 800 Degrees F
NAS1732 - Nut, Blind, Serrated Head, Self-Locking, Closed End, 450 Deg. F
NAS1736 - Nut Self-Locking, Blind Rivet, Elliptical Head Installation Data For
NAS1757 - Nut, Self-Locking, 450 Deg. F, Hexagon - Low Height 80 K.S.I.
NAS1758 - Nut, Self Locking, Extended Washer, Double Hexagon, 220 Ksi, 450 Deg. F
NAS1759 - Nut, Self-Locking, Double Hexagon Shear 450 Deg. F
NAS1765 - Nut, Self Aligning, Self Locking, Plate - Two Lug, Floating, 125 Ksi Ftu, 450 Deg. F & 800 Deg. F
NAS1794 - Nut, Self Locking, Counterbore, Replaceable Element
NAS1795 - Clip Retaining Replaceable Nut Plate
NAS1803 - Nut, Plate, Self Locking, Floating, Spring Loaded
NAS1804 - Nut, Self-Locking, Extended Washer, Double Hexagon, Alloy Steel, 180 Ksi, 450 Deg. F
NAS1805 - Nut, Self-Locking, Extended Washer, Double Hexagon, Cres, 180 Ksi, 450 Deg. F And 800 Deg. F
NAS1870 - Nut, Self Locking, Plate Two Lug, Deep Counterbore, Floating, 125 Ksi Ftu, 450 & 800 Deg. F
NAS1871 - Nut Assembly, Torque Limiting, 600 Deg. F Application, .2500-28 Unjf-3B Thread
NAS1872 - Nut, Torque Limiting 9Oo Deg. F Application 1/4-28 Unjf-3B Thread
NAS395 - Nut - "U" Type Sheet Spring
NAS396 - Nut - "U" Type Countersunk Sheet Spring
NAS487 - Nut - Instrument Mount
NAS488 - Nut - "J" Type Sheet Spring
NAS696 - Nut, Self Locking, Plate-On Lug, Low Height C Bore, Reduced Rived Spacing (S/S By Nasm21071)
NAS699 - Nut, Cylinder Lock
QPL-24129 - Nut, Self-Locking, Hexagon, (Plastic Insert), 250 Deg. F.
QPL-25027-17 - Nut, Self Locking, 250 Deg. F, 450 Deg. F, And 800 Deg. F
QPL-7873-22 - Nut, Self-Locking, 1200 Deg. F
QPL-8056-1 - Nuts, Self Locking, Free Spinning, 1200 Deg F (Use Mil-N-7873 Or Qpl-7873)
QPL-85353-5 - Nut (Fasteners), Internally Threaded, Preload Locking, 450 Deg. F, 800 Deg. F, & 1200 Deg. F, General Specification For
QPL-85730-4 - Nut, Self-Locking, Spline Drive, Assembled Washer, Nickel Alloy 718, 220 Ksi Ftu, 900 Deg. F, General Specification For
QPL-8922-12 - Nut, Self-Locking, Steel, 220 Ksi Ftu, 450 Degrees F
QPL-8984-13 - Nut, Self Locking, Steel, 260 Ksi Ftu 450 Deg F.
QPL-8985-10 - Nut, Self-Locking, Steel, 180 Ksi Ftu, 450 Deg. F
W-W-81 - Washer, Storage Battery Post, Noncorrosive
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business