MIL-DTL-45913D
1.2.3 Series Locknuts covered by this specification are intended to be of the following series.
Hex locknut (regular)
Hex thin locknut (jam)
Hex thick locknut
Hex heavy locknut
Hex flanged locknut
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of this
list, document users are cautioned that they must meet all specified requirements documents cited in sections
3 and 4 of this specification, whether or not they are listed.
2.2. Government Documents
2.2.1 Specifications, standards, and handbooks. The following specifications, standards and handbooks
form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those listed in the issue of the Department of Defense Index Specifications and Standards
(DoDISS) and supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS
DEPARTMENT OF DEFENSE
MIL-A-8625
- Anodic Coatings, for Aluminum and Aluminum Alloys.
MIL-DTL-45913/1 - Nut, Self-Locking, Hexagon, Non-Metallic Locking Feature, 250oF,
UNC/UNF-2B.
MIL-DTL-45913/2 - Nut, Self-Locking, Hexagon, All-Metal Locking Feature, 250oF,
UNC/UNF-2B.
MIL-DTL-45913/3 - Nut, Self-Locking, Hexagon, Non-Metallic Locking Feature, 250oF,
UNC/UNF-3B.
MIL-DTL-45913/4 - Nut, Self-Locking, Hexagon, All-Metal Locking Feature, 250oF,
UNC/UNF-3B.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following document(s) form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of the documents which are DoD-Adopted are
those listed in the issue of the DoDISS cited in the solicitation. Unless otherwise specified, the issues of
documents not listed in the DoDISS are the issues of the documents cited in the solicitation (see 6.2).
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business