METRIC
MIL-DTL-70329A
7 JANUARY 2009
SUPERSEDING
DOD-N-70329
16 August 1982
MILITARY SPECIFICATION
NUT, PLAIN, ROUND, BALL AND ROLLER BEARINGS, METRIC,
GENERAL SPECIFICATION FOR
Inactive for new design after 1 October 1999
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers nut, plain, round, ball and roller bearings, that is slotted on its periphery,
for use in assemblies with ball and roller bearings.
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in section 3, 4, or 5 of this specification. This section
does not include documents cited in other sections of this specification or recommended for additional information or as
examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that
they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not
they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
FEDERAL STANDARDS
FED-STD-H28/21 - Screw-Thread Standards for Federal Services, Section 21, Metric Screw Threads
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-16232
- Phosphate Coating, Heavy, Manganese or Zinc Base (For Ferrous Metals)
DOD-N-70329/1
- Nut, Plain, Round, Ball and Roller Bearings, Narrow Series, Metric
Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center
Philadelphia, ATTN: DSCP-NASA, 700 Robbins Avenue, Philadelphia, PA 19111-5096 or emailed to
dscpg&ispecomments@dla.mil. Since contact information can change, you may want to verify the currency
of this information using the ASSIST Online database at https://assist.daps.dla.mil/
AMSC N/A
FSC 5310
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business